[cisco-voip] IP Trunk

[Ryan Ratliff]

The 3.3 one I believe needs to be setup as an ICT (non or gateway controlled
depending on if you are using one) under device->trunk.   Make sure you
define them as a meshed topology.  Since the H225 Setup will be sent from
the CM where the phones are registered if the other cluster does not have
that server defined as a gateway (or trunk) then it will be ignored.

-Ryan
----- Original Message ----- 
From: "Candace Holman" <Candace_Holman at harvard.edu>
To: <cisco-voip at puck.nether.net>
Sent: Monday, April 12, 2004 5:45 PM
Subject: [cisco-voip] IP Trunk


> I'm trying to set up an IP trunk between a 3.2.2 and 3.3.3 cluster.  It
> doesn't work.  They don't connect.  I set up the 3.2.2 as an H323
> intercluster trunk and the 3.3.3 as an IP trunk.  There's not much on CCO
> for troubleshooting this.  Any references from the group?
>
> Candace
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip