[cisco-voip] Question on software to run with Lucent Excel Switch EXS2000

[Ganbold]

Hi,

We have same switch with 32 x E1 capacity. We are using ADS 5.1. Software 
seems to be running OK.
However we have problem with SS7 module. There is saying some error 
something like "number not completed".
Did you have this problem before?
Can you give me some recommendation and advice on this issue?
I hope somebody in this list point me to the right direction.

tia,

Ganbold


At 08:58 AM 22.04.2004, you wrote:
>Hi folks,
>We have a Lucent Excel EXS2000 with 80 x T1 capacity.  Please recommend a 
>decent software that will allow us to make good use of this dum-switch.  I 
>heard a lot about ADS and so on.  Thanks for any feed-back.
>
>
>
>
>
>Cheers,
>
>Frank Kim
>Loud Packet, Inc. / TelePacket, Inc.
>27455 Tierra Alta Way, Suite A.
>Temecula, CA 92590
>Mobile: 909-757-5119
>Main:    714-263-9000
>Direct:   714-263-9099
>Fax:     909-494-4425
>Email:  <mailto:frank at loudpacket.com>frank at loudpacket.com
>            <mailto:frank at telepacket.com>frank at telepacket.com
>Web:   <http://www.loudpacket.com>http://www.loudpacket.com
>            <http://www.telepacket.com>http://www.telepacket.com
>
>***Free 5mbps tier 1 internet bandwidth at One Wilshire, Los Angeles***
><http://www.telepacket.com/docs/Free_Internet.doc>http://www.telepacket.com/docs/Free_Internet.doc
>
>### Discussion for VoIP related topics ###
>
>*** <http://www.voip-forums.com/>http://www.VoIP-Forums.com ***
>
>*** http://www.SIP-Forums.com **
>
>
>
>
>
>
>
>
>
>
>_______________________________________________
>cisco-voip mailing list
>cisco-voip at puck.nether.net
>https://puck.nether.net/mailman/listinfo/cisco-voip