[cisco-voip] Multiple Span Configuraton

[J A Pine]

I am configuring mutliple IPCC Express servers for a testing environment.  I
am trying to configure the RASCAL monitoring service.  For those not
familiar with it, it requires a secondary NIC setup on a SPAN port so that
it can monitor/sniff the voice packets.  Unfortunately I've ran into a
problem.  The switch already has SPAN setup for another RASCAL
configuration.  This is on a Catalyst 6509 running CatOS 6.4.  I was
wondering if it is possible to configure to different SPAN configurations on
the same switch?  If so, is there a version of CatOS I should upgrade to
that would support it, or do I need to go to IOS?  Thanks in advance!
 
Jesse