[cisco-voip] Multiple Span Ports

[Jesse A. Pine]

I am configuring mutliple IPCC Express servers for a testing
environment.  I am trying to configure the RASCAL monitoring service.
For those not familiar with it, it requires a secondary NIC setup on a
SPAN port so that it can monitor/sniff the voice packets.  Unfortunately
I've ran into a problem.  The switch already has SPAN setup for another
RASCAL configuration.  This is on a Catalyst 6509 running CatOS 6.4.  I
was wondering if it is possible to configure to different SPAN
configurations on the same switch?  If so, is there a version of CatOS I
should upgrade to that would support it, or do I need to go to IOS?
Thanks in advance!
 
Jesse
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20040430/c6f7dfd0/attachment-0001.html