[cisco-voip] VIC-2FXO analog Ground Start Distance Limit

[Carter, Bill]

I am 18,000 ft. The line is Ground Start. Could the issue be grounding
of the Voice Gateway?

Aug  5 11:16:18.013 CDT: htsp_process_event: [3/0,
FXOGS_ONHOOK,E_HTSP_SETUP_REQ]fxogs_onhook_setup
Aug  5 11:16:18.013 CDT: [3/0] set signal state = 0x0 timestamp = 0
Aug  5 11:16:18.017 CDT: htsp_timer - 10000 msec
Aug  5 11:16:18.161 CDT: htsp_process_event: [3/0,
FXOGS_WAIT_TIP_GROUND, E_DSP_SIG_0100]fxogs_start_dial
Aug  5 11:16:18.161 CDT: htsp_timer_stop
Aug  5 11:16:18.161 CDT: [3/0] set signal state = 0xC timestamp = 0
Aug  5 11:16:18.161 CDT: htsp_timer - 1000 msec
Aug  5 11:16:18.670 CDT: htsp_process_event: [3/0, FXOGS_WAIT_DIAL_TONE,
E_DSP_SIG_1100]
Aug  5 11:16:18.670 CDT: fxogs_no_tipgnd
Aug  5 11:16:18.674 CDT: htsp_timer_stop
Aug  5 11:16:18.674 CDT: htsp_timer_stop2
Aug  5 11:16:18.674 CDT: htsp_timer2 - 350 msec
Aug  5 11:16:19.027 CDT: htsp_process_event: [3/0, FXOGS_WAIT_DIAL_TONE,
E_HTSP_EVENT_TIMER2]fxogs_wait_dial_tone_disc
Aug  5 11:16:19.027 CDT: htsp_timer_stop
Aug  5 11:16:19.027 CDT: [3/0] set signal state = 0x4 timestamp = 0
Aug  5 11:16:19.027 CDT: htsp_timer - 2000 msec
Aug  5 11:16:19.031 CDT: htsp_process_event: [3/0, FXOGS_GUARD_OUT,
E_HTSP_RELEASE_REQ]fxogs_guard_out_release
Aug  5 11:16:20.080 CDT: htsp_timer_stop3 htsp_setup_req
Aug  5 11:16:20.088 CDT: htsp_process_event: [3/0, FXOGS_GUARD_OUT,
E_HTSP_SETUP_REQ]
Aug  5 11:16:20.092 CDT: htsp_process_event: [3/0,
FXOGS_WAIT_TIP_GROUND, E_HTSP_RELEASE_REQ]fxogs_wait_tip_release


-----Original Message-----
From: micko [mailto:micko at micko.net] 
Sent: Thursday, August 05, 2004 12:13 PM
To: Carter, Bill
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] VIC-2FXO analog Ground Start Distance Limit

On Thu, Aug 05, 2004 at 10:38:11AM -0500, Carter, Bill wrote:
> How far away from the CO can a Voice Gateway be with Ground Start
Analog
> lines?

I'm about 28.000 ft from the Bellsouth CO and never had any issues.

micko