[cisco-voip] Re: insufficient bandwidth on Cisco ATA 188 with GnuGK

[Oleg Shevtsov]

hi

On Fri, Aug 06, 2004 at 12:15:49PM +0200, vladimir botka wrote:
>5. the problem *IS* to call ATA188 from outside world ( was tested with 
>OhPhone and NetMeeting). The ATA188 rings, but there is no connection 
>established.

1) ohphone used to send uncompatible message about bandwidth.
So you can configure GK to allow maximum bandwidth.
With AquaGK this advice works fine.

2) In case of codecs problem ATA rings without normal connect too.

>next is the ATA188 syslog:
>callingpartynumber info: 0x60 0x0 0
>Q931<-0:Proceeding
>SCC:ev=21[0:0] 0 0
>GK<-0: ARQ: 0
>GK->0: ACF:0 GK-routed
>IRR in 120 sec
>CallRasCallBack: 1 33e19a7 33e1af5 33e3d6b
>SCC:ev=5[0:0] 13 0
>[0:0]RINGING
>SCC->(0 0) <cmd 3>
>Q931<-0:Alerting
>Q931->0:ReleaseComplete: reason -1, tone = 7
>H245<-0:EndSessionCmd 0
>Q931<-*:ReleaseComplete
>SCC:ev=7[0:0] 5 0
>[0]MPT mode 0
>GK<-0: DRQ:0
>SCC:ev=13[0:0] 0 0
>GK->0: DCF
>CallRasCallBack: 1 0 0 33e3fdf
>;
>0,
>last message repeated 3 times

The call is GK routed. Check GK log file for more details.


>
>I would appreciate any competent suggestion.
>If needed I can help with FreeBSD and GnuGk configuration for Cisco ATA 
>and H323.
>
>Cheers,
>
>Vladimir
>
>_______________________________________________
>cisco-voip mailing list
>cisco-voip at puck.nether.net
>https://puck.nether.net/mailman/listinfo/cisco-voip

-- 
Oleg Shevtsov
Chief of NOC InterExchange Carrier
phone +380442399740
mobile +380672341642
fax +380442468910
http://www.ixcaccounting.com