[cisco-voip] insufficient bandwidth on Cisco ATA 188 with GnuGK

[Bryan Deaver]

>From the trace on the ATA, the release appears to be coming into the ata.
As to why the GK would be dropping the call, don't know.  If you can get a
ethereal trace of the message being sent out and maybe compare this with
your netmeeting case which does work, it might help answer as to why.

What version of the ata are you running?  What codec are you using?  Do you
have the config page on the ata when this is failing?

Bryan



> From: vladimir botka <vlado at botka.homeunix.org>
> Date: Fri, 06 Aug 2004 12:15:49 +0200
> To: cisco-voip at puck.nether.net, openh323gk-users at lists.sourceforge.net
> Subject: [cisco-voip] insufficient bandwidth on Cisco ATA 188 with GnuGK
> 
> Hello,
> when I try to make a call to Cisco ATA188 I recieve "insufficient
> bandwidth" message.
> My configuration:
> ATA188 (192.168.1.7) <---> (192.168.1.6) FreeBSD.5.2;GnuGK
> (botka.homeunix.org) <--->
> 1. I use OhPhone (sw) to make calls.
> 2. there is no problem to make calls to ATA188 from internal network
> (192.168.1.0) with OhPhone, or NetMeeting
> 3. there is no problem to make calls with OhPhone, or NetMeeting from
> outside world to OhPhone, or NetMeeting on internal network (192.168.1.0)
> 5. the problem *IS* to call ATA188 from outside world ( was tested with
> OhPhone and NetMeeting). The ATA188 rings, but there is no connection
> established.
> next is the ATA188 syslog:
> callingpartynumber info: 0x60 0x0 0
> Q931<-0:Proceeding
> SCC:ev=21[0:0] 0 0
> GK<-0: ARQ: 0
> GK->0: ACF:0 GK-routed
> IRR in 120 sec
> CallRasCallBack: 1 33e19a7 33e1af5 33e3d6b
> SCC:ev=5[0:0] 13 0
> [0:0]RINGING
> SCC->(0 0) <cmd 3>
> Q931<-0:Alerting
> Q931->0:ReleaseComplete: reason -1, tone = 7
> H245<-0:EndSessionCmd 0
> Q931<-*:ReleaseComplete
> SCC:ev=7[0:0] 5 0
> [0]MPT mode 0
> GK<-0: DRQ:0
> SCC:ev=13[0:0] 0 0
> GK->0: DCF
> CallRasCallBack: 1 0 0 33e3fdf
> ;
> 0,
> last message repeated 3 times
> 
> I would appreciate any competent suggestion.
> If needed I can help with FreeBSD and GnuGk configuration for Cisco ATA
> and H323.
> 
> Cheers,
> 
> Vladimir
> 
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip