[cisco-voip] How to Block Caller-ID on 2600/5300 with T1/E1

[Jared Mauch]

On Tue, Aug 17, 2004 at 02:38:23PM +0200, Arnd Vehling wrote:
> Stefan Stefanov wrote:
> >On the pots dial-peer put:
> >
> >clid restrict
> >
> >This will set the 3a bit in the calling party number information element
> >(if I remember correctly) and should do exactly what you want.
> 
> 
> This sounds really good but:
> 
> ---
> gw1-nyc(config)#dial-peer voice 101 pots
> gw1-nyc(config-dial-peer)#clid ?
> % Unrecognized command
> ---
> 
> Argh. Is
> 
> IOS (tm) C2600 Software (C2600-IS-M), Version 12.2(4)T3
> too old for that?

	Looks like you need 12.2(11)T or later

http://www.cisco.com/en/US/products/sw/iosswrel/ps5207/products_command_reference_chapter09186a00801a7f22.html#wp1031862

	- jared


-- 
Jared Mauch  | pgp key available via finger from jared at puck.nether.net
clue++;      | http://puck.nether.net/~jared/  My statements are only mine.