[cisco-voip] How to Block Caller-ID on 2600/5300 with T1/E1

[Stefan Stefanov]

Hi,

Yes, probably your IOS does not have this feature. 12.2.11T10 should do
the job.

Stefan


On Tue, 2004-08-17 at 15:38, Arnd Vehling wrote:
> Stefan Stefanov wrote:
> > On the pots dial-peer put:
> > 
> > clid restrict
> > 
> > This will set the 3a bit in the calling party number information element
> > (if I remember correctly) and should do exactly what you want.
> 
> 
> This sounds really good but:
> 
> ---
> gw1-nyc(config)#dial-peer voice 101 pots
> gw1-nyc(config-dial-peer)#clid ?
> % Unrecognized command
> ---
> 
> Argh. Is
> 
> IOS (tm) C2600 Software (C2600-IS-M), Version 12.2(4)T3
> too old for that?
> 
> regards,
> 
>    Arnd
-- 
Best Regards,

Stefan Stefanov
CTO
Orbitel, Inc.
tel.: +359 2 937 07 20 fax: +359 2 980 42 58