[cisco-voip] 7940's Disconnect calls when placed on hold

[Ryan Ratliff]

Is the call using the g.729 codec?  If so, go to the service parameters 
for IP Voice Media Streaming App and make sure that codec is enabled 
for MOH.   I don't remember if this causes disconnects or just no MOH 
but it's worth a shot.

-Ryan
On Dec 1, 2004, at 10:32 AM, Travis Llewellyn wrote:

>
> We have had several locations say the when they put a call on hold or
> transfer a call to another station it disconnects the call.
> Has anyone else had this problem?  If so what did you do to fix it?
> Thanks in advance.
>
>
> Travis Llewellyn
> Network Administrator
> Communication Federal Credit Union
> travisll at comfedcu.org
>
> ----------------------------------------
> 1 Corinthians 3:18 If any one of you thinks he is wise by the standards
> of this age, he should become a "fool" so that he may become wise.
>
>
>
> -----------------------------------------------------------------
> This e-mail and the files transmitted with it are the property
> of Communication Federal Credit Union and/or its affiliates,
> are confidential, and are intended solely for use of the
> individual or entity to whom this e-mail is addressed. If you
> are not one of the named recipient(s) or otherwise have reason
> to believe that you have received this message in error, please
> notify the sender at 405-879-5600 and delete this message
> immediately from your computer. Any other use, retention,
> dissemination, forwarding, printing, or copying of this e-mail
> is strictly prohibited.
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>