[cisco-voip] International calling

[Eric Knudson]

One problem that I see commonly that seems to match this is when
you're using a 4ESS PRI, but aren't setting the plan/type to
international on the outgoing SETUP. Can you verify switchtype and
post q931 debugs?


On Thu, 2 Dec 2004 13:25:15 -0800, Voll, Scott <scott.voll at wesd.org> wrote:
> I'm using CM 3.3.4sr2 and a V-GW to call international calls.  Can
> anyone tell me why I get the error tones and, "You have called a number
> that has been disconnected or is no longer in service, please check the
> number and try again."  If I dial the number from my Cell it works but
> not from our VoIP system.
> 
> I have tickets open with both the telco(qwest) and Cisco TAC, but have
> not gotten anywhere.  Since I'm getting that message that would mean I'm
> getting it from the telco, right?  When I hang up I get the normal call
> clearing in my debug isdn q931.
> 
> Any ideas would be a help.
> 
> TIA
> 
> Scott
> 
> ????????????????????????????????????????????????????????????????????
> 
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>