[cisco-voip] International calling

[Simon Hamilton-Wilkes]

One problem I've had multiple times is setting the plan type to
International rather than Unknown.  International sets the type but does
not remove the 011, which confuses the network.  If the call is left
'Unknown' the network strips 011 itself and accepts the call as
International.

Simon 

-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Voll, Scott
Sent: Thursday, December 02, 2004 1:25 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] International calling

I'm using CM 3.3.4sr2 and a V-GW to call international calls.  Can
anyone tell me why I get the error tones and, "You have called a number
that has been disconnected or is no longer in service, please check the
number and try again."  If I dial the number from my Cell it works but
not from our VoIP system.

I have tickets open with both the telco(qwest) and Cisco TAC, but have
not gotten anywhere.  Since I'm getting that message that would mean I'm
getting it from the telco, right?  When I hang up I get the normal call
clearing in my debug isdn q931.  

Any ideas would be a help.

TIA

Scott

????????????????????????????????????????????????????????????????????

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip