[cisco-voip] 7960 firmware load P00306000400

[Vandy Hamidi]

Found this on Cisco.com


-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Mike Armstrong
Sent: Wednesday, November 24, 2004 1:21 PM
To: cisco-voip at puck.nether.net; Candace Holman
Subject: Re: [cisco-voip] 7960 firmware load P00306000400

Did you try to go the other way -- i.e., upgrade to P00306000500?
That's 
what I'm running, and the time seems to be synched OK.  Of course, there
may 
be other problems, but none that seem to affect us.

mike
----- Original Message ----- 
From: "Candace Holman" <Candace_Holman at harvard.edu>
To: "Mike Armstrong" <mfa at crec.ifas.ufl.edu>;
<cisco-voip at puck.nether.net>
Sent: Wednesday, November 24, 2004 3:08 PM
Subject: Re: [cisco-voip] 7960 firmware load P00306000400


> No, this isn't a problem here.  Also, I discovered that there are
several 
> 7960's that have this problem.  Some of the phones still use the
default 
> load and some just won't downgrade to the default load.  If noone has 
> seen/fixed this problem I guess I'll open a TAC ticket and report a
bug or 
> RMA them.
>
> The reason this is a problem is that this load will not keep a correct

> clock synchronization with CM 3.3.3.
>
> Candace
>
> At 01:57 PM 11/24/2004, Mike Armstrong wrote:
>>I had a similar problem, which turned out that I had updated phone 
>>firmware loads in the CM Publisher OK, but neglected to update the 
>>Subscriber. However, the phones were registered to the Subscriber, so
when 
>>they reset, they got the loads that were in the Subscriber.  I do
remember 
>>looking in the Subscriber System->Device Defaults and seeing the new
loads 
>>listed, and thinking that somehow the Subscriber had automagically
updated 
>>itself. Needless to say....
>>
>>Mike Armstrong
>>UF/IFAS CREC
>>
>>>Date: Tue, 23 Nov 2004 15:43:59 -0500
>>>From: Candace Holman <Candace_Holman at harvard.edu>
>>>Subject: [cisco-voip] 7960 firmware load P00306000400
>>>To: cisco-voip at puck.nether.net
>>>Message-ID: <5.2.1.1.2.20041123153736.02a34720 at camail.harvard.edu>
>>>Content-Type: text/plain; charset="us-ascii"; format=flowed
>>>
>>>I have a phone stuck with firmware load P00306000400 (6.0-3).  I set
the
>>>device record in CM (3.3.3) to force it to use P00305000400 (5.0-4)
and 
>>>it
>>>will not pick up the older load on a reset.  There are no errors in
the
>>>status messages on the phone, and no tftp errors on the server.  Does
>>>anyone know a workaround?
>>>
>>>Thanks,
>>>
>>>=====================================================================
>>>Candace Holman
>>
>>_______________________________________________
>>cisco-voip mailing list
>>cisco-voip at puck.nether.net
>>https://puck.nether.net/mailman/listinfo/cisco-voip
> 

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip