[cisco-voip] 7912 logo trouble[Scanned]

[Benny Giebens]

Hello,
I have followed these instructions attached here, and it worked fine.
Additional remark:
- After copying the files to the tftp server, restart the tftp service.
- the arbitrary number in step 3 and 4 needs to be higher every time you
create a new file, otherwise the old image will stay on the phone.
Rgds
Benny Giebens


1. Download the SCCP Software Package Zip file.
http://www.cisco.com/cgi-bin/tablebuild.pl/ip_phone_client

2. Create the bitmap of the image to load to the phone -The bitmap must
be 88x27 pixels in size -The bitmap must be black and white -The bitmap
must be saved as a monochrome image type

3. Convert the bitmap into a logo image using bmp2logo.exe -bmp2logo x
input_file output.logo where x is an arbitrary number
-example: bmp2logo 10 cisco.bmp cisco.logo

4. Create a text file that will be used to build the ld or gk cfg file
-The file can be any name -Must contain the upgradelogo key -The
SampleLogo.txt can be used as a template.
NOTE: the image number defined in step 3 must be used in this text file

5. Create the cfg file, use the cfgfmt.exe -cfgfmt SampleLogo.txt
lddefault.cfg
NOTE: if the same image is desired on all 7905's and 7912, use the
lddefault.cfg and gkdefault.cfg files.

6. Move the .logo file into the TFTPPATH directory

7. Move the lddefault.cfg or gkdefault.cfg) (attached) into the COUNTRY
specific folder.
-The ld or gk cfg files will need to be in at least
\TFTPPATH\United_States

NOTE: The cfg file will need to be copied to each COUNTRY directory
supported by the CM.

8. Reboot the 7905 or 7912 for the new image to display

Rgds
Benny Giebens

-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Martin Lohnert
Sent: vrijdag 3 december 2004 10:57
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] 7912 logo trouble[Scanned]

G'Day everyone, 

I'm trying to change the Cisco logo on a 7912 for a custom one, but
these phones just don't like me
I've followed the cisco.com guidelines on how to do this (found at
http://www.cisco.com/en/US/products/hw/phones/ps379/products_administrat
ion_guide_chapter09186a00801cac23.html#wp1010905
)
I've created the gkdefault.cfg file, mylogo.logo file, restarted tftp,
phones, ccm's and did everything I could think of, but the Cisco logo
is still on there... GRRR... I've tried tracing TFTP server, and It
seems that the 7912 when booting is not even requesting gkdefault.cfg
or any other "gk" file.

I've tested CCM 4.1.2 and 4.0.1 with both 4.0 and 5.0 SCCP images. Is
there anyone who has actually seen this work and would be willing to
post his logo and gkdefault.cfg files ?

Many Thanks, 
Martin
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip