[cisco-voip] new gateway setup

[Chad Whitten]

im trying to get a new gateway setup - its a 2610xm with a pri vwic.  ive got 
it configured for mgcp and my callmanager has it registered.  i setup a new 
route pattern - 5.@ to point all calls to this gateway, but when i dial 
5-nxx-XXXX, im seeing the 5 being passed along with the number which shouldnt 
be happening.  

when i created the route pattern, i just took my standard 9.@, copied it, 
change the 9 to a 5 and changed the selected gateway.

from a debug isdn q931
2w4d: ISDN Se1/0:23 Q931: TX -> SETUP pd = 8  callref = 0x0002
        Bearer Capability i = 0x8090A2
                Standard = CCITT
                Transer Capability = Speech
                Transfer Mode = Circuit
                Transfer Rate = 64 kbit/s
        Channel ID i = 0xA98397
                Exclusive, Channel 23
        Display i = 'Chad Whitten'
        Calling Party Number i = 0x0080, '6019880998'
                Plan:Unknown, Type:Unknown
        Called Party Number i = 0xA1, '58426804'
                Plan:ISDN, Type:National
2w4d: ISDN Se1/0:23 Q931: RX <- RELEASE_COMP pd = 8  callref = 0x8002
        Cause i = 0x829C - Invalid number format (incomplete number)
-- 
Chad Whitten
Network Administrator
neXband Communications
cwhitten at nexband.com
601-944-4801 Phone
601-944-4803 Fax