[cisco-voip] CCM - CLIR?

[Wes Sisk]

Hi Vincent,

The implementation specifics vary a bit by CM version.

In 3.3 and earlier, define a translation pattern that is matched and 
modifies the CLID and then extends the call to the final destination.
In 4.0 and later, you can apply a calling party number transform mask on 
the route pattern, or change the calling party number/name presentation 
to "private".

The caller will have to modify their dialing to invoke the feature.
If you need internal calls ipphone-ipphone CLID blocked, I have only 
been able to do this with a translation pattern.

/Wes

Vincent De Keyzer wrote:

> Hello,
>
>  
>
> on CCM, is there a way to apply CLIR to certain calls?
>
>  
>
> (Applying CLIR being of course different from sending no CLI)
>
>  
>
> V
>
>  
>
>------------------------------------------------------------------------
>
>_______________________________________________
>cisco-voip mailing list
>cisco-voip at puck.nether.net
>https://puck.nether.net/mailman/listinfo/cisco-voip
>  
>