[cisco-voip] cme 3.2.1. and g.711 to G.729 Codec

[Hering, Marc]

Use device pools.  On one pool assign it to G7.11 and the other to G729.
Then place the devices in the proper pools...

<M> 

-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of
wmartinoglio at asp.it
Sent: Friday, December 17, 2004 11:07 AM
To: cisco-voip at puck.nether.net
Cc: dfabrizio at asp.it
Subject: [cisco-voip] cme 3.2.1. and g.711 to G.729 Codec

Hi all,
i've a problem.
how i can to change the codec to G.729 from G.711 for ADSL connections
in the following scenario?

a) CCME 3.2.1 installed on a 2610XM at central office, linked to a PBX
Alcatel Omnipcx 4400 via ISDN BRI. Central office use Cisco switches and
routers, like 36xx and 26xx
b) 1 7905G IP phone on Lan at central office
c) 1 7905G IP phone on WAN in a branch office linked to the central
office via ADSL 64Kbps(other branch at 128 Kbps). the branch offics use
26xx or cisco 837 router for connections to central office.

the 2 IP phone use the following firmware: CP7905040000SCCP040701A.sbin

this configuration use 80 Kbps, of course G.711. How i can switch to
G.729 for these WAN connections?
thank you in advance
auker


_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip