[cisco-voip] Directory Integration

[Ryan Ratliff]

Any feature that requires a pin will still require a pin.  Once you  
integrate with AD you will need to set the pin for each user.  What  
this will actually do is create a profile in the Cisco ou for that  
user.  There is an attribute added to each AD Account that CM will use  
to find out where the profile is.  All the Cisco specific information  
(department, pin, device association, etc) is actually stored in the  
profile.

So short answer is they will use their AD username with the pin you set  
up for them.

-Ryan
On Dec 23, 2004, at 9:58 AM, King, Jesse wrote:

> I have a silly question about the Directory Integration plug-in for AD.
>  
> Does this eliminate the need for a username/PIN/Password in the  
> default DC that comes with CM?
>  
> IE, when a user wants to log into ccmuser or web dialer, do they still  
> need to use an assigned username/pin, or can they use their AD  
> username/password?
>  
> I can't seem to find much more info on this than :
>  
> http://www.cisco.com/univercd/cc/td/doc/product/voice/c_callmg/4_1/ 
> sys_ad/4_1_2/ccmsys/a04direc.htm
>  
> Thanks.
>  
> Jesse
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip