[cisco-voip] Bundling Voice Ports on 1760

[Eric Knudson]

Hi Ahmad,

You can use a trunk-group to aggregate the voice-ports. The
configuration is a little different for each voice port type.

http://www.cisco.com/en/US/products/sw/iosswrel/ps5187/products_command_reference_chapter09186a00800b3511.html

Regards,

Eric




On Sun, 26 Dec 2004 14:48:07 +0100, Ahmad Cheikh-Moussa <acm at netuse.de> wrote:
> Hi!
> 
> I have a 1760 with CCME 3.1 and two voice ports.
> I want to configure a dial-peer which can use both
> voice ports. At this moment I can only use one
> voice-port in my dial-peer.
> 
> Can someone tell me, how to configure the dial-peer
> in order to use both voice ports for in and outgoing
> calls ?
> 
> Regards,
>  Ahmad
> 
> P.S.: Merry X-mas
> 
> Regards,
>  Ahmad
> 
> P.S.: Merry X-mas
> 
> --
> Ahmad Cheikh-Moussa
> NetUSE AG
> Dr.-Hell-Straße, 24107 Kiel, Germany
> Telefon: +49 431 2390 400 --  Telefax: +49 431 2390 499
> Service: Service at NetUSE.DE --  http://NetUSE.DE/
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>