[cisco-voip] FXS problems

[Erick B.]

What type of hardware modules?

How is the network-clocking set up?

If you do a 'show controller t1' do you have slip
seconds (if you have T1s)? 

Any sort of error will cause fax's to fail off and on.
On the XM routers you need to make sure the clocking
is setup right so there are no errors. The Slip second
are sign clocking is not right. It may not be the T1
circuit but due to clock configuration on the router
itself.

Erick

--- "Campbell, Jeremy" <jcampbell at ci.davidson.nc.us>
wrote:

> I have a FXS card in a Cisco 2651XM router, and I'm
> having trouble with
> faxing and data transmissions across through the FXS
> ports.  Does anyone
> have a some advice on what to look for or try?  
> 
>  
> 
> Thanks,
> 
> Jeremy
> 
>  
> 
> ________________________________________
> Jeremy P. Campbell
> Information Systems Director
> Town of Davidson, NC
> 704-892-7591 ext. 248 - voice
> 704-892-3971 - fax
> 
>  
> 
> > _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
> 



		
__________________________________ 
Do you Yahoo!? 
Read only the mail you want - Yahoo! Mail SpamGuard. 
http://promotions.yahoo.com/new_mail