[cisco-voip] MGCP-ccm

[Wes Sisk]

Marcin,

Hit one of the MGCP guides on CCO and watch the typing.
"application MCPAPP" isn't quite going to cut it.

http://www.cisco.com/en/US/partner/products/sw/voicesw/ps556/products_tech_n
ote09186a008009428e.shtml

/wes
  -----Original Message-----
  From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net]On Behalf Of Marcin Nowacki
  Sent: Thursday, February 12, 2004 11:12 AM
  To: cisco-voip at puck.nether.net
  Subject: [cisco-voip] MGCP-ccm


  Hello



  I have a question J



  In my lab i have recently put Router 1760 witch 4xFXS ports with ccm
3.3(3) and I tried to run MGCP on it. When I configured ccm and router I
have no signal on fxs ports . Does anyone knows what is going on .



  Router's configuration added :



  !

  mgcp

  mgcp call-agent 10.1.1.2

  mgcp dtmf-relay voip codec all mode out-of-band

  !

  ccm-manager mgcp

  !



  /FXS port /



  dial-peer voice 1 pots

  application MCPAPP

  port 2/2





  Call manager is configured as in cisco instruction.



  Maybe I should configure something else on this router ?







  ***********************************************************************

  Systemy Sieciowe SEVENET Sp. z o.o.

  Marcin Nowacki

  tel. +58 3400414, 600490308; fax. +58 3400401

  e-mail: marcin_nowacki at sevenet.pl

  ***********************************************************************




-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20040212/db7e0cf6/attachment.html