[cisco-voip] upgrade firmware on IP Phones
Voll, Scott
Scott.Voll at wesd.org
Sat Feb 28 09:10:23 EST 2004
Figured it out. The 7940 and 7960 upgrade without doing anything. The
7905's have to be manually rebooted to get the new firmware. Easiest
way I could do it was shut down the ports and no shut. Everything is
now on the new firmware.
Scott
-----Original Message-----
From: Voll, Scott
Sent: Saturday, February 28, 2004 5:23 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] upgrade firmware on IP Phones
I'm upgrading my CM and would like to know if the Phones will
automatically upgrade to the new firmware or if I have to set them to
upgrade? If I have to set them up to upgrade is there a way to do all
of them at the same time?
TIA
Scott
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
More information about the cisco-voip
mailing list