[cisco-voip] CCM 3.3 Configuration Question

[Anthony Mendoza]

You can also make sure CiscoCCM1.<your domain> resolves to your call 
manager.  I've had to do that at remote offices where we were serving 
DHCP from network devices and did not have the option to send any custom 
dhcp options, like option 150 or 66.

On 1/28/2004 5:19 PM, Troy Davis wrote:

> Try changing the DHCP server to reply with option 150, set to the
> CallManager/TFTP server's IP address.  If an IOS device does DHCP, use:
> 
> ip dhcp pool voice_pool
>  option 150 ip 192.168.1.18
> 
> To use a hostname instead of an IP, set option 66 instead of 150 (and make
> sure you're serving valid nameserver IPs).
> http://www.cisco.com/en/US/products/hw/modules/ps2797/products_tech_note09186a0080093fbe.shtml
> may help.
> 
> Troy
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip

-- 
Anthony Mendoza

CONFIDENTIALITY NOTICE: The information contained in this message and or attachments is intended only for the person or entity to which it is addressed and may contain confidential and/or privileged material. Any review, retransmission, dissemination, copying, or other use of this information by persons or entities other than the intended recipient is prohibited. If you received this e-mail or its attachments in error, please contact the sender and delete the material from any system and destroy any copies.