[cisco-voip] call origination

[Ýsmail CAN]

Hi,
I explained my scenario. pls, help me about this problem.
 
My scenario is:
 
gsm channel bank------------->controller e1------->myGW----------------->destGW
                                                                        |
                                                                        |
                                                                     Radius
 
If a call comes from gsm channel bank, call must be authenticated, authorized and accounted in radius. First, ý dont use radius, i add the following dial-peer, but it did not work.
 
dial-peer voice 100 voip
 incomming called-number 9054T
 voice-class codec 99
 voice-class h323 99
 session target ipv4:a.b.c.d
 
voice class codec 99
 codec preference 1 g729r8
 codec preference 2 g723r53
 codec preference 3 g723r63
 codec preference 4 g723ar63

voice class h323 99
  call start fast
****************************************************************************
Then I tried with radius config. If someone call the number of sim in the gsm channel bank, then first I want to authenticate and authorize than the person should dial the destination number. I tried, but no request comes to radius. 
Can you help me? 
in "session target ipv4:a.b.c.d" after authentication and authorization I can decide a.b.c.d because there is more than one gw to go call. 
 
aaa authentication login deneme group radius
aaa authentication ppp deneme group radius
aaa authorization exec deneme group radius
aaa authorization network deneme group radius
aaa accounting update newinfo
aaa accounting exec deneme start-stop group radius
aaa accounting network deneme start-stop group radius
aaa accounting connection deneme start-stop group radius
aaa preauth
 group radius
 clid required
 dnis required
 
radius-server host x.x.x.x auth-port 1812 acct-port 1813
radius-server key 7 100000000618
radius-server vsa send accounting
radius-server vsa send authentication
 
voice class aaa 1
 authentication method deneme
 authorization method deneme
 accounting method deneme
 
dial-peer voice 100 voip
 incomming called-number 9054T
 voice-class codec 99
 voice-class aaa 1
 voice-class h323 99
 session target ras


aniel Tibor Fuchs <daniel.fuchs at datora.net> wrote:
v\:* {behavior:url(#default#VML);}o\:* {behavior:url(#default#VML);}w\:* {behavior:url(#default#VML);}.shape {behavior:url(#default#VML);}
Did you add a dial-peer  for incoming called number?

 

Dial-peer voice 10 pots

Port xxxx

Incoming callet .T

 

And you need a Dia-peer voip to direct the traffic to the terminator.

 

Dial-peer voice 20 voip

Destination-pattern xxT

Session target ip4:xxx.xxx.xxx.xxx

Tech xxxx

 

This is really generic.

 

Daniel

 

 

---------------------------------


From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of ]smail CAN
Sent: Thursday, July 08, 2004 8:56 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] origination


 

hi,


 


I am new with as5350 configuration. I can not configure my as5350 gateway for call origination. 


 


gsm channel bank------------->controller e1--as5350---------->


                                                                   |


                                                                   |


                                                               radius


 


Can you help me or send config part only belongs to origination?


 


 


 


 


---------------------------------


Do you Yahoo!?
Yahoo! Mail Address AutoComplete - You start. We finish.



---------------------------------
Do you Yahoo!?
Yahoo! Mail - 50x more storage than other providers!

		
---------------------------------
Do you Yahoo!?
New and Improved Yahoo! Mail - 100MB free storage!
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20040708/1e0f4bc6/attachment.html