[cisco-voip] CCME and CCM Integration

[Hering, Marc]

Hey all, I have a strange question,
I have a CCM which serves my main offices, We just inherited a site
office that has a CCME running on a 3725 with a CUE module, I updated
CCME and CUE to the latest versions and am now trying to integrate them
I am having a strange problem however,
 
I setup the proper dial peers in CCME to point to my CCM for our
internal extensions and set the CCME router to be an H323 gateway in my
CCM along with the dial patterns needed.
 
When I dial the 4 digits it rings through, but I get no display names,
and if the person on the CCME side does not answer it rings busy it
never transfers to CUE.  (If you call from ccme to ccme it works fine)
 
This is running through a PIX firewall, and I have all the Skinny ports
open for CCME and CUE but I am stumped as to why this won't work.
 
Should I just move em over to CCM? (If so does 3.2 use Skinny as it's
protocol or is it SIP? I need to know so I can reprogram the firewall to
allow communications)
 
Thanks in advance!
 

Marc Hering

Network Engineer

The Gale Company

100 Campus Drive 

Suite 200

Florham Park, NJ 07932

Direct: 973.301.8209

Fax: 973.236.2150

www.thegalecompany.com <http://www.thegalecompany.com/>
 
 
 
 
 
 
 
The Gale Company is one of the largest real estate companies in the industry with a global portfolio exceeding 60 million square feet of office space.  For more information contact 973-301-9500 or visit www.TheGaleCompany.com 

 

 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20040715/49067c3f/attachment-0001.html