[cisco-voip] radius e1

[Ýsmail CAN]

Hello,
 
My gateway as5350 has two E1 interface.
I have defined 
radius-server host zzzz auth-port 1812 acc-port 1813
 
I work gw-to-gw.
 
call application voice remote_ip 
flash:app_remote_ip_authenticate.2.0.0.tcl

dial-peer voice 200 voip
 permission orig
 huntstop
 application remote_ip
 incoming called-number ^9054T
!
dial-peer voice 1 pots
 permission term
 huntstop
 destination-pattern 9054T
 port 3/1:0
 forward-digits 11
 prefix ,

 
I terminate calls with GSM channel bank.
 
controller E1 3/0
 ds0-group 0 timeslots 1-15,17-28 type r2-digital

controller E1 3/1
 ds0-group 1 timeslots 1-15,17-28 type r2-digital

till here all thing is normal. I work properly. But now I want to work with the following scenario:
I will define two radius with 
aaa group server radius rad1
server xxxx
aaa group server radius rad2
server yyyy

 
I want to use rad1 for controller e1 3/0 and rad2 for controller e1 3/1.
Two different types of call come with prefix 3547#number(to e1 3/0) and 9878#number (to e1 3/1).
 
But I dont know how can I define rad1 to e1 3/0 and rad2 to e1 3/1. 
I think that I must define rad1 and rad2 to dial-peers separately. But how?
can you help me,pls?
 
 
 

		
---------------------------------
Do you Yahoo!?
Vote for the stars of Yahoo!'s next ad campaign!
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20040717/da8571be/attachment.html