[cisco-voip] ip phone: transfer call

[Voll, Scott]

Still does it in 3.3.4

 

  _____  

From: Lelio Fulgenzi [mailto:lelio at uoguelph.ca] 
Sent: Thursday, July 22, 2004 7:43 AM
To: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] ip phone: transfer call

 

This is normal for CCM 3.3.3 and lower. I believe it is 'fixed' in
v3.3.4 and 4.x but I couldn't find anything in the release notes about
it.

 

Essentially, a phone can have only two calls active at once per line. By
pressing the transfer button, you are initiating a new call - when you
already have two in queue, you can't initiate a third.

 

They have some way to work around it, but I don't like it:

 

http://www.cisco.com/en/US/customer/products/sw/voicesw/ps556/products_t
ech_note09186a00800945a6.shtml

 

 

	----- Original Message ----- 

	From: Leonardo D'Urso <mailto:durso at alter.it>  

	To: cisco-voip at puck.nether.net 

	Sent: Thursday, July 22, 2004 10:22 AM

	Subject: [cisco-voip] ip phone: transfer call

	 

	
	hi there,
	
	I have a strange problem of ip phones (7905/12/40/60). I have
configured 
	on a line with a DN. The call waiting service is active.
	When I receive a phone call, I can transfer it on another phone.
	When I receive 2 calls, one hold and the other active, if I try
to 
	transfer one of that (the active), I have that the tranfer soft
button is 
	not usable.
	Is this normal?
	
	thanks in advance.
	Leo
	
	_______________________________________________
	cisco-voip mailing list
	cisco-voip at puck.nether.net
	https://puck.nether.net/mailman/listinfo/cisco-voip

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20040722/711102bf/attachment-0001.html