[cisco-voip] VoIP transit call

[Wes Sisk]

Greetings Sumiya,

AFAIK this was not possible before the new IPIP Gateway features in IOS.

This feature appears to be added in 12.3 code:
http://www.cisco.com/en/US/partner/tech/tk652/tk701/technologies_configurati
on_example09186a00801b0803.shtml

http://www.cisco.com/en/US/partner/products/sw/voicesw/ps5640/products_qanda
_item09186a00801da69b.shtml

/Wes

> -----Original Message-----
> From: cisco-voip-bounces at puck.nether.net
> [mailto:cisco-voip-bounces at puck.nether.net]On Behalf Of Sumiya
> Sent: Thursday, June 03, 2004 9:20 PM
> To: cisco-voip at puck.nether.net
> Subject: [cisco-voip] VoIP transit call
>
>
> Hi all,
>
>
> My gw1  is working with destination gw2(partner)  directly.
> Gw 2 accepts only gw1 ip address.
>
> I  want to send calls from my gw3  to gw2  via gw1.
> Gw 1 will be transit gw. All gws are Cisco5300.
>
> But gw1 is releasing all calls (h323 cause code =3).
>
> Please help me How i can make transit calls via GW1.
>
>
> I did like below.
>
> Gw3 :
> dial-peer voice 33 voip
> destination pattern 123T
> session target ipv4:gateway1-ip-address
>
> Gw1 :
> dial-peer voice 11 voip
> destination pattern 123T
> session target ipv4:gateway2-ip-address
>
> Gw1 :
> dial-peer voice 11 pot
> destination pattern 123T
> port 0:0
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip