[cisco-voip] Setting up gatekeeper on IOS

[Vincent De Keyzer]

Voice only for the moment (didn't quite get the concept of zones yet).
 
We are an ISP starting to offer telephony services.
 
On the customer side, there will be many VoIP gateways (connected to
customer's PBXs).
 
On the network side, there will be a cluster of VoIP gateways with PRI
interfaces. Routing of PSTN calls should go via one or another of these
gateways depending on the destination.
 
In my very naïve idea, all CPEs would ask the gatekeeper which GW (IP
address) to use for a certain prefix, so the gatekeeper + VoIP GWs would
behvae like a switch doing least-cost-routing?...
 
Vincent
 

-----Original Message-----
From: Voll, Scott [mailto:Scott.Voll at wesd.org] 
Sent: mardi 2 mars 2004 22:09
To: Vincent De Keyzer; cisco-voip at puck.nether.net
Subject: RE: [cisco-voip] Setting up gatekeeper on IOS



What are you trying to setup? Voice or video?  Zones and prefixes?  You need
at least IP Plus IOS and the first global command is Gatekeeper.

 

-----Original Message-----
From: Vincent De Keyzer [mailto:vincent at dekeyzer.net] 
Sent: Tuesday, March 02, 2004 12:03 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Setting up gatekeeper on IOS

 

Hello people,

 

can somebody please point me to a document (e.g. whitepaper) that explains
how to set up a Cisco router to be a H.323 gatekeeper?

 

Thanks in advance

 

Vincent

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20040304/5e660c5e/attachment.html