[cisco-voip] "System recieved a System Error" on Cisco 3640

[Marcin Nowacki]

There is workaround , like always in such a situation to change ios
version to latest.

Greetings


-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Peter Nixon
Sent: Monday, March 08, 2004 8:57 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] "System recieved a System Error" on Cisco 3640

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Does anyone have a clue about the following? (Screenshot at the link
below)

http://www.peternixon.net/tmp/cisco3640_error/cisco.jpg

This has happened on a _very_ remote router which will require
approximately 
18hours of overland travel to get a technician to...

The router is constantly rebooting, and consequently the Sat link it is 
connected to is also down and I only have limited  (and slow) access to
it 
through GoToMyPC.

As well as the serial card connected to the sat link, the router also
has a 
dual E1 voice card in it..

Thanks in Advance for any help.

- -- 

Peter Nixon
http://www.peternixon.net/
PGP Key: http://www.peternixon.net/public.asc
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.2 (GNU/Linux)

iD8DBQFATNAqAcdsUt9pJjwRAhotAKDOsbqk2M9MvLO+FYDBAdRO2FSe7wCfX8tX
4cGgzQ1gyRTSQcKh3oDxD3Q=
=011Z
-----END PGP SIGNATURE-----

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip