[cisco-voip] "System recieved a System Error" on Cisco 3640
Peter Nixon
listuser at peternixon.net
Thu Mar 11 09:29:26 EST 2004
On Monday 08 March 2004 22:13, Jim Duncan wrote:
> Peter, send me the real ASCII text, not a JPEG graphic image, and I'll
> try running it through our output decoder. I can't promise anything --
> I don't work in the TAC anymore, and that's a really old release, but
> I'll give it a shot.
>
> I did try typing in what I thought was important from the JPEG, but I
> didn't get anywhere. I really need the plain text from the console.
>
> I hope this is helpful.
Attached is the crash info
Thanks in Advance
--
Peter Nixon
http://www.peternixon.net/
PGP Key: http://www.peternixon.net/public.asc
-------------- next part --------------
C3600 processor with 98304 Kbytes of main memory
Main memory is configured to 64 bit mode with parity disabled
program load complete, entry point: 0x80008000, size: 0xc8460c
Self decompressing the image : ##################################################################################################################################### [OK]
Smart Init is disabled. IOMEM set to: 10
Using iomem percentage: 10
Restricted Rights Legend
Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706
Cisco Internetwork Operating System Software
IOS (tm) 3600 Software (C3640-JS-M), Version 12.2(23), RELEASE SOFTWARE (fc2)
Copyright (c) 1986-2004 by cisco Systems, Inc.
Compiled Wed 28-Jan-04 15:00 by kellmill
Image text-base: 0x60008930, data-base: 0x6145A000
%ERR-1-GT64010: Fatal error, Parity error on master read
cause=0x0110E083, mask=0x0CD01F00, real_cause=0x00100000
bus_err_high=0x00000000, bus_err_low=0x31000000, addr_decode_err=0x14000470
r0 = FFFFFFFF r1 = FFFFFFFF r2 = 0 r3 = 61FB0000 r4 = 0
r5 = B r6 = FFFFFFFF r7 = BFC00000 r8 = 0 r9 = 1
r10 = 0 r11 = 8 r12 = 0 r13 = 0 r14 = 0
r15 = 0 r16 = 0 r17 = C100 r18 = 0 r19 = 3401C101
r20 = 0 r21 = 6039EF50 r22 = FFFFFFFF r23 = FFFF00FF r24 = 0
r25 = 6039EF30 r26 = 0 r27 = 80E r28 = FFFFFFFF r29 = 80000000
r30 = 0 r31 = 0 r32 = FFFFFFFF r33 = FFFFFFFF r34 = FFFFFFFF
r35 = FFFFFFFF r36 = FFFFFFFF r37 = FFFFFFFF r38 = FFFFFFFF r39 = FFFFFFFF
r40 = FFFFFFFF r41 = FFFFFFFF r42 = FFFFFFFF r43 = FFFFFFFF r44 = FFFFFFFF
r45 = FFFFFFFF r46 = FFFFFFFF r47 = FFFFFFFF r48 = 0 r49 = 62355140
r50 = 0 r51 = 0 r52 = 0 r53 = 3041F001 r54 = 0
r55 = 30410000 r56 = FFFFFFFF r57 = FFFFFFFF r58 = 0 r59 = 6222F140
r60 = FFFFFFFF r61 = FFFFFFFF r62 = 0 r63 = 603DE23C
sreg = 3401C103 mdlo_hi = 0 mdlo = 14
mdhi_hi = 0 mdhi = BB2460 badvaddr_hi = FFFFFFFF
badvaddr = FFFFFFFF cause = FFFFFFFF epc_hi = 0
epc = 603DE240 err_epc_hi = FFFFFFFF err_epc = FFFFFFFF
%ERR-1-FATAL: Fatal error interrupt, reloading
err_stat=0x10
=== Flushing messages (00:00:20 UTC Mon Mar 1 1993) ===
Queued messages:
*** System received a System Error ***
signal= 0x16, code= 0x0, context= 0x62216bc8
PC = 0x6039fc70, Cause = 0x420, Status Reg = 0x34018002
System Bootstrap, Version 11.1(20)AA2, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)
Copyright (c) 1999 by cisco Systems, Inc.
C3600 processor with 98304 Kbytes of main memory
Main memory is configured to 64 bit mode with parity disabled
program load complete, entry point: 0x80008000, size: 0xc8460c
Self decompressing the image : ##################################################################################################################################### [OK]
Smart Init is disabled. IOMEM set to: 10
Using iomem percentage: 10
Restricted Rights Legend
Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706
Cisco Internetwork Operating System Software
IOS (tm) 3600 Software (C3640-JS-M), Version 12.2(23), RELEASE SOFTWARE (fc2)
Copyright (c) 1986-2004 by cisco Systems, Inc.
Compiled Wed 28-Jan-04 15:00 by kellmill
Image text-base: 0x60008930, data-base: 0x6145A000
%ERR-1-GT64010: Fatal error, Parity error on master read
cause=0x0110E083, mask=0x0CD01F00, real_cause=0x00100000
bus_err_high=0x00000000, bus_err_low=0x31000000, addr_decode_err=0x14000470
r0 = FFFFFFFF r1 = FFFFFFFF r2 = 0 r3 = 61FB0000 r4 = 0
r5 = B r6 = FFFFFFFF r7 = BFC00000 r8 = 0 r9 = 1
r10 = 0 r11 = 8 r12 = 0 r13 = 0 r14 = 0
r15 = 0 r16 = 0 r17 = C100 r18 = 0 r19 = 3401C101
r20 = 0 r21 = 6039EF50 r22 = FFFFFFFF r23 = FFFF00FF r24 = 0
r25 = 6039EF30 r26 = 0 r27 = 80E r28 = FFFFFFFF r29 = 80000000
r30 = 0 r31 = 0 r32 = FFFFFFFF r33 = FFFFFFFF r34 = FFFFFFFF
r35 = FFFFFFFF r36 = FFFFFFFF r37 = FFFFFFFF r38 = FFFFFFFF r39 = FFFFFFFF
r40 = FFFFFFFF r41 = FFFFFFFF r42 = FFFFFFFF r43 = FFFFFFFF r44 = FFFFFFFF
r45 = FFFFFFFF r46 = FFFFFFFF r47 = FFFFFFFF r48 = 0 r49 = 62355140
r50 = 0 r51 = 0 r52 = 0 r53 = 3041F001 r54 = 0
r55 = 30410000 r56 = FFFFFFFF r57 = FFFFFFFF r58 = 0 r59 = 6222F140
r60 = FFFFFFFF r61 = FFFFFFFF r62 = 0 r63 = 603DE23C
sreg = 3401C103 mdlo_hi = 0 mdlo = 14
mdhi_hi = 0 mdhi = BB2460 badvaddr_hi = FFFFFFFF
badvaddr = FFFFFFFF cause = FFFFFFFF epc_hi = 0
epc = 603DE240 err_epc_hi = FFFFFFFF err_epc = FFFFFFFF
%ERR-1-FATAL: Fatal error interrupt, reloading
err_stat=0x10
=== Flushing messages (00:00:20 UTC Mon Mar 1 1993) ===
Queued messages:
*** System received a System Error ***
signal= 0x16, code= 0x0, context= 0x62216bc8
PC = 0x6039fc70, Cause = 0x420, Status Reg = 0x34018002
System Bootstrap, Version 11.1(20)AA2, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)
Copyright (c) 1999 by cisco Systems, Inc.
C3600 processor with 98304 Kbytes of main memory
Main memory is configured to 64 bit mode with parity disabled
program load complete, entry point: 0x80008000, size: 0xc8460c
Self decompressing the image : ##################################################################################################################################### [OK]
Smart Init is disabled. IOMEM set to: 10
Using iomem percentage: 10
Restricted Rights Legend
Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706
Cisco Internetwork Operating System Software
IOS (tm) 3600 Software (C3640-JS-M), Version 12.2(23), RELEASE SOFTWARE (fc2)
Copyright (c) 1986-2004 by cisco Systems, Inc.
Compiled Wed 28-Jan-04 15:00 by kellmill
Image text-base: 0x60008930, data-base: 0x6145A000
%ERR-1-GT64010: Fatal error, Parity error on master read
cause=0x0110E083, mask=0x0CD01F00, real_cause=0x00100000
bus_err_high=0x00000000, bus_err_low=0x31000000, addr_decode_err=0x14000470
r0 = FFFFFFFF r1 = FFFFFFFF r2 = 0 r3 = 61FB0000 r4 = 0
r5 = B r6 = FFFFFFFF r7 = BFC00000 r8 = 0 r9 = 1
r10 = 0 r11 = 8 r12 = 0 r13 = 0 r14 = 0
r15 = 0 r16 = 0 r17 = C100 r18 = 0 r19 = 3401C101
r20 = 0 r21 = 6039EF50 r22 = FFFFFFFF r23 = FFFF00FF r24 = 0
r25 = 6039EF30 r26 = 0 r27 = 80E r28 = FFFFFFFF r29 = 80000000
r30 = 0 r31 = 0 r32 = FFFFFFFF r33 = FFFFFFFF r34 = FFFFFFFF
r35 = FFFFFFFF r36 = FFFFFFFF r37 = FFFFFFFF r38 = FFFFFFFF r39 = FFFFFFFF
r40 = FFFFFFFF r41 = FFFFFFFF r42 = FFFFFFFF r43 = FFFFFFFF r44 = FFFFFFFF
r45 = FFFFFFFF r46 = FFFFFFFF r47 = FFFFFFFF r48 = 0 r49 = 62355140
r50 = 0 r51 = 0 r52 = 0 r53 = 3041F001 r54 = 0
r55 = 30410000 r56 = FFFFFFFF r57 = FFFFFFFF r58 = 0 r59 = 6222F140
r60 = FFFFFFFF r61 = FFFFFFFF r62 = 0 r63 = 603DE23C
sreg = 3401C103 mdlo_hi = 0 mdlo = 14
mdhi_hi = 0 mdhi = BB2460 badvaddr_hi = FFFFFFFF
badvaddr = FFFFFFFF cause = FFFFFFFF epc_hi = 0
epc = 603DE240 err_epc_hi = FFFFFFFF err_epc = FFFFFFFF
%ERR-1-FATAL: Fatal error interrupt, reloading
err_stat=0x10
=== Flushing messages (00:00:20 UTC Mon Mar 1 1993) ===
Queued messages:
*** System received a System Error ***
signal= 0x16, code= 0x0, context= 0x62216bc8
PC = 0x6039fc70, Cause = 0x420, Status Reg = 0x34018002
System Bootstrap, Version 11.1(20)AA2, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)
Copyright (c) 1999 by cisco Systems, Inc.
C3600 processor with 98304 Kbytes of main memory
Main memory is configured to 64 bit mode with parity disabled
program load complete, entry point: 0x80008000, size: 0xc8460c
Self decompressing the image : ##################################################################################################################################### [OK]
Smart Init is disabled. IOMEM set to: 10
Using iomem percentage: 10
Restricted Rights Legend
Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706
Cisco Internetwork Operating System Software
IOS (tm) 3600 Software (C3640-JS-M), Version 12.2(23), RELEASE SOFTWARE (fc2)
Copyright (c) 1986-2004 by cisco Systems, Inc.
Compiled Wed 28-Jan-04 15:00 by kellmill
Image text-base: 0x60008930, data-base: 0x6145A000
%ERR-1-GT64010: Fatal error, Parity error on master read
cause=0x0110E083, mask=0x0CD01F00, real_cause=0x00100000
bus_err_high=0x00000000, bus_err_low=0x31000000, addr_decode_err=0x14000470
r0 = FFFFFFFF r1 = FFFFFFFF r2 = 0 r3 = 61FB0000 r4 = 0
r5 = B r6 = FFFFFFFF r7 = BFC00000 r8 = 0 r9 = 1
r10 = 0 r11 = 8 r12 = 0 r13 = 0 r14 = 0
r15 = 0 r16 = 0 r17 = C100 r18 = 0 r19 = 3401C101
r20 = 0 r21 = 6039EF50 r22 = FFFFFFFF r23 = FFFF00FF r24 = 0
r25 = 6039EF30 r26 = 0 r27 = 80E r28 = FFFFFFFF r29 = 80000000
r30 = 0 r31 = 0 r32 = FFFFFFFF r33 = FFFFFFFF r34 = FFFFFFFF
r35 = FFFFFFFF r36 = FFFFFFFF r37 = FFFFFFFF r38 = FFFFFFFF r39 = FFFFFFFF
r40 = FFFFFFFF r41 = FFFFFFFF r42 = FFFFFFFF r43 = FFFFFFFF r44 = FFFFFFFF
r45 = FFFFFFFF r46 = FFFFFFFF r47 = FFFFFFFF r48 = 0 r49 = 62355140
r50 = 0 r51 = 0 r52 = 0 r53 = 3041F001 r54 = 0
r55 = 30410000 r56 = FFFFFFFF r57 = FFFFFFFF r58 = 0 r59 = 6222F140
r60 = FFFFFFFF r61 = FFFFFFFF r62 = 0 r63 = 603DE23C
sreg = 3401C103 mdlo_hi = 0 mdlo = 14
mdhi_hi = 0 mdhi = BB2460 badvaddr_hi = FFFFFFFF
badvaddr = FFFFFFFF cause = FFFFFFFF epc_hi = 0
epc = 603DE240 err_epc_hi = FFFFFFFF err_epc = FFFFFFFF
%ERR-1-FATAL: Fatal error interrupt, reloading
err_stat=0x10
=== Flushing messages (00:00:20 UTC Mon Mar 1 1993) ===
Queued messages:
*** System received a System Error ***
signal= 0x16, code= 0x0, context= 0x62216bc8
PC = 0x6039fc70, Cause = 0x420, Status Reg = 0x34018002
System Bootstrap, Version 11.1(20)AA2, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)
Copyright (c) 1999 by cisco Systems, Inc.
C3600 processor with 98304 Kbytes of main memory
Main memory is configured to 64 bit mode with parity disabled
PC = 0xbfc0a024, Cause = 0x2000, Status Reg = 0x3041f003
monitor: command "boot" aborted due to user interrupt
rommon 1 > confreg
Configuration Summary
enabled are:
load rom after netboot fails
console baud: 115200
boot: image specified by the boot system commands
or default to: cisco2-C3600
do you wish to change the configuration? y/n [n]:
rommon 2 > confreg
Configuration Summary
enabled are:
load rom after netboot fails
console baud: 115200
boot: image specified by the boot system commands
or default to: cisco2-C3600
do you wish to change the configuration? y/n [n]: y
enable "diagnostic mode"? y/n [n]:
enable "use net in IP bcast address"? y/n [n]:
disable "load rom after netboot fails"? y/n [n]:
enable "use all zero broadcast"? y/n [n]:
enable "break/abort has effect"? y/n [n]:
enable "ignore system config info"? y/n [n]:
change console baud rate? y/n [n]: y
enter rate: 0 = 9600, 1 = 4800, 2 = 1200, 3 = 2400
4 = 19200, 5 = 38400, 6 = 57600, 7 = 115200 [7]: 0
change the boot characteristics? y/n [n]: y
enter to boot:
0 = ROM Monitor
1 = the boot helper image
2-15 = boot system
[2]:
Configuration Summary
enabled are:
load rom after netboot fails
console baud: 9600
boot: image specified by the boot system commands
or default to: cisco2-C3600
do you wish to change the configuration? y/n [n]: y
enable "diagnostic mode"? y/n [n]: y
enable "use net in IP bcast address"? y/n [n]:
disable "load rom after netboot fails"? y/n [n]:
enable "use all zero broadcast"? y/n [n]:
enable "break/abort has effect"? y/n [n]:
enable "ignore system config info"? y/n [n]:
change console baud rate? y/n [n]:
change the boot characteristics? y/n [n]: y
enter to boot:
0 = ROM Monitor
1 = the boot helper image
2-15 = boot system
[2]: 2
Configuration Summary
enabled are:
diagnostic mode
load rom after netboot fails
console baud: 9600
boot: image specified by the boot system commands
or default to: cisco2-C3600
do you wish to change the configuration? y/n [n]:
You must reset or power cycle for new config to take effect
rommon 3 > confreg
Configuration Summary
enabled are:
diagnostic mode
load rom after netboot fails
console baud: 9600
boot: image specified by the boot system commands
or default to: cisco2-C3600
do you wish to change the configuration? y/n [n]: y
disable "diagnostic mode"? y/n [n]: y
enable "use net in IP bcast address"? y/n [n]:
disable "load rom after netboot fails"? y/n [n]: y
enable "use all zero broadcast"? y/n [n]:
enable "break/abort has effect"? y/n [n]:
enable "ignore system config info"? y/n [n]:
change console baud rate? y/n [n]:
change the boot characteristics? y/n [n]:
Configuration Summary
enabled are:
console baud: 9600
boot: image specified by the boot system commands
or default to: cisco2-C3600
do you wish to change the configuration? y/n [n]:
You must reset or power cycle for new config to take effect
rommon 4 >
rommon 4 >
rommon 4 >
rommon 4 >
rommon 4 > reset
More information about the cisco-voip
mailing list