[cisco-voip] Asterisk and a CCM...

[Jared Mauch]

	SIP should be able to handle the call transfers back and forth.

	Depending on what phones you're using, you might want to
try out the chan_skinny module in asterisk.  I'm using it with mixed
success on a test phone (7970).  I suspect that the 7940/60 firmware
works better when running SCCP.

	- Jared

On Mon, Mar 15, 2004 at 10:28:24AM -0500, Kyle Stone wrote:
> Not for a gateway.. Asterisk is essentially a self contained PBX, I'm
> trying to route calls into and out of it.
> 
> 
> Kyle
> 
> 
> -----Original Message-----
> From: Jared Mauch [mailto:jared at puck.nether.net] 
> Sent: Monday, March 15, 2004 10:23 AM
> To: Kyle Stone
> Cc: cisco-voip at puck.nether.net
> Subject: Re: [cisco-voip] Asterisk and a CCM...
> 
> On Mon, Mar 15, 2004 at 10:19:20AM -0500, Kyle Stone wrote:
> > I'm trying to bridge Asterisk PBX and CCM.  I setup a h323 gateway on
> > CCM and pointed it to the Asterisk box.  I build chan_oh323 for
> > asterisk.. installed it, and pointed it to route to the CCM.
> > I call a CCM extension from Asterisk and the phone rings 1.5 times and
> > CCM ends the call.  I can tell this from the Asterisk debug logs.
> > 
> > 
> > Anyone have any suggestions as how to debug this on the CCM side?
> 
> 	Not sure if your CM supports it, but perhaps you want to
> try SIP instead of H.323.  Much simpler, IMHO.
> 
> 	- Jared
> 
> -- 
> Jared Mauch  | pgp key available via finger from jared at puck.nether.net
> clue++;      | http://puck.nether.net/~jared/  My statements are only
> mine.

-- 
Jared Mauch  | pgp key available via finger from jared at puck.nether.net
clue++;      | http://puck.nether.net/~jared/  My statements are only mine.