[cisco-voip] Asterisk and a CCM...

[Ryan Ratliff]

You should be able to see the H225 communication between the gateway and CM
in the CallManager traces.  Make sure they are set to detailed.  If you are
running an older version of CM (ie 3.1) you will also want to set
SdlTraceTypeFlag to 0x8000EB15.  This trace should also tell you the
disconnect cause for the call.

What type of trunk do you have going to the Asterisk?  If it's a PRI what
does a 'debug isdn q931' show?

-Ryan
----- Original Message ----- 
From: "Kyle Stone" <kstone at teledvance.com>
To: <cisco-voip at puck.nether.net>
Sent: Monday, March 15, 2004 10:19 AM
Subject: [cisco-voip] Asterisk and a CCM...


> I'm trying to bridge Asterisk PBX and CCM.  I setup a h323 gateway on
> CCM and pointed it to the Asterisk box.  I build chan_oh323 for
> asterisk.. installed it, and pointed it to route to the CCM.
> I call a CCM extension from Asterisk and the phone rings 1.5 times and
> CCM ends the call.  I can tell this from the Asterisk debug logs.
>
>
> Anyone have any suggestions as how to debug this on the CCM side?
>
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip