[cisco-voip] Asterisk and a CCM...

[Jared Mauch]

On Mon, Mar 15, 2004 at 10:30:56AM -0500, Ryan Ratliff wrote:
> You should be able to see the H225 communication between the gateway and CM
> in the CallManager traces.  Make sure they are set to detailed.  If you are
> running an older version of CM (ie 3.1) you will also want to set
> SdlTraceTypeFlag to 0x8000EB15.  This trace should also tell you the
> disconnect cause for the call.
> 
> What type of trunk do you have going to the Asterisk?  If it's a PRI what
> does a 'debug isdn q931' show?

	Asterisk is a software based PBX.

	www.asteriskpbx.org

	- Jared

> ----- Original Message ----- 
> From: "Kyle Stone" <kstone at teledvance.com>
> To: <cisco-voip at puck.nether.net>
> Sent: Monday, March 15, 2004 10:19 AM
> Subject: [cisco-voip] Asterisk and a CCM...
> 
> 
> > I'm trying to bridge Asterisk PBX and CCM.  I setup a h323 gateway on
> > CCM and pointed it to the Asterisk box.  I build chan_oh323 for
> > asterisk.. installed it, and pointed it to route to the CCM.
> > I call a CCM extension from Asterisk and the phone rings 1.5 times and
> > CCM ends the call.  I can tell this from the Asterisk debug logs.
> >
> >
> > Anyone have any suggestions as how to debug this on the CCM side?
> >
> >
> >
> > _______________________________________________
> > cisco-voip mailing list
> > cisco-voip at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/cisco-voip
> 
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip

-- 
Jared Mauch  | pgp key available via finger from jared at puck.nether.net
clue++;      | http://puck.nether.net/~jared/  My statements are only mine.