[cisco-voip] Asterisk and a CCM... I got the logs....

[Kyle Stone]

I created a trace... I'm not sure what I'm looking for here thou.. It's
got a few calls made by other devices too, so I didn't want to paste it
here..



Kyle










-----Original Message-----
From: Ryan Ratliff [mailto:rratliff at cisco.com] 
Sent: Monday, March 15, 2004 10:42 AM
To: Kyle Stone; cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] Asterisk and a CCM...

Obviously my ignorance of Asterisk is getting in the way here.

In the CallManager web page go to Application->Serviceability.  Then go
to
Trace->Configuration.  Choose the server that the phone is registered
to.
Select the Cisco CallManager service.
Now hit the "Set Default" button, and then change the debug trace level
to
detailed (drop-down box).  Hit Update.

Now your CCM traces are being logged in full detail to c:\program
files\cisco\trace\ccm.

-Ryan
----- Original Message ----- 
From: "Kyle Stone" <kstone at teledvance.com>
To: "Ryan Ratliff" <rratliff at cisco.com>; <cisco-voip at puck.nether.net>
Sent: Monday, March 15, 2004 10:41 AM
Subject: RE: [cisco-voip] Asterisk and a CCM...


> Umm... I'm pretty green in CCM still.  I don't really know where the
> trace utility is or how to use it.  It's a 3.2 CCM, btw.. I don't have
> any thing terminating in Asterisk as of yet.. I'm trying to route all
> the call out of it that don't exist locally to the CCM.  I can call
from
> an h323 client to an h323 client in Asterisk.. I know that works.. and
I
> can get the sccp 7960 on the CCM to ring.. but like I said.. 1.5 rings
> and it's dead.. Or if I answer it.. it goes fast busy.   How do I
check
> the capabilities of what codecs are allowed to call this phone?
Maybie
> it's a codec mismatch on the Asterisk side of the call.
>
>
>
>
> Kyle
>
>
> -----Original Message-----
> From: Ryan Ratliff [mailto:rratliff at cisco.com]
> Sent: Monday, March 15, 2004 10:31 AM
> To: Kyle Stone; cisco-voip at puck.nether.net
> Subject: Re: [cisco-voip] Asterisk and a CCM...
>
> You should be able to see the H225 communication between the gateway
and
> CM
> in the CallManager traces.  Make sure they are set to detailed.  If
you
> are
> running an older version of CM (ie 3.1) you will also want to set
> SdlTraceTypeFlag to 0x8000EB15.  This trace should also tell you the
> disconnect cause for the call.
>
> What type of trunk do you have going to the Asterisk?  If it's a PRI
> what
> does a 'debug isdn q931' show?
>
> -Ryan
> ----- Original Message ----- 
> From: "Kyle Stone" <kstone at teledvance.com>
> To: <cisco-voip at puck.nether.net>
> Sent: Monday, March 15, 2004 10:19 AM
> Subject: [cisco-voip] Asterisk and a CCM...
>
>
> > I'm trying to bridge Asterisk PBX and CCM.  I setup a h323 gateway
on
> > CCM and pointed it to the Asterisk box.  I build chan_oh323 for
> > asterisk.. installed it, and pointed it to route to the CCM.
> > I call a CCM extension from Asterisk and the phone rings 1.5 times
and
> > CCM ends the call.  I can tell this from the Asterisk debug logs.
> >
> >
> > Anyone have any suggestions as how to debug this on the CCM side?
> >
> >
> >
> > _______________________________________________
> > cisco-voip mailing list
> > cisco-voip at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/cisco-voip
>