[cisco-voip] Asterisk and a CCM... I got the logs....

[Ryan Ratliff]

Feel free to unicast it to me with info on calling party dn, called party,
etc.

-Ryan
----- Original Message ----- 
From: "Kyle Stone" <kstone at teledvance.com>
To: "Ryan Ratliff" <rratliff at cisco.com>; <cisco-voip at puck.nether.net>
Sent: Monday, March 15, 2004 1:00 PM
Subject: RE: [cisco-voip] Asterisk and a CCM... I got the logs....


> I created a trace... I'm not sure what I'm looking for here thou.. It's
> got a few calls made by other devices too, so I didn't want to paste it
> here..
>
>
>
> Kyle
>
>
>
>
>
>
>
>
>
>
> -----Original Message-----
> From: Ryan Ratliff [mailto:rratliff at cisco.com]
> Sent: Monday, March 15, 2004 10:42 AM
> To: Kyle Stone; cisco-voip at puck.nether.net
> Subject: Re: [cisco-voip] Asterisk and a CCM...
>
> Obviously my ignorance of Asterisk is getting in the way here.
>
> In the CallManager web page go to Application->Serviceability.  Then go
> to
> Trace->Configuration.  Choose the server that the phone is registered
> to.
> Select the Cisco CallManager service.
> Now hit the "Set Default" button, and then change the debug trace level
> to
> detailed (drop-down box).  Hit Update.
>
> Now your CCM traces are being logged in full detail to c:\program
> files\cisco\trace\ccm.
>
> -Ryan
> ----- Original Message ----- 
> From: "Kyle Stone" <kstone at teledvance.com>
> To: "Ryan Ratliff" <rratliff at cisco.com>; <cisco-voip at puck.nether.net>
> Sent: Monday, March 15, 2004 10:41 AM
> Subject: RE: [cisco-voip] Asterisk and a CCM...
>
>
> > Umm... I'm pretty green in CCM still.  I don't really know where the
> > trace utility is or how to use it.  It's a 3.2 CCM, btw.. I don't have
> > any thing terminating in Asterisk as of yet.. I'm trying to route all
> > the call out of it that don't exist locally to the CCM.  I can call
> from
> > an h323 client to an h323 client in Asterisk.. I know that works.. and
> I
> > can get the sccp 7960 on the CCM to ring.. but like I said.. 1.5 rings
> > and it's dead.. Or if I answer it.. it goes fast busy.   How do I
> check
> > the capabilities of what codecs are allowed to call this phone?
> Maybie
> > it's a codec mismatch on the Asterisk side of the call.
> >
> >
> >
> >
> > Kyle
> >
> >
> > -----Original Message-----
> > From: Ryan Ratliff [mailto:rratliff at cisco.com]
> > Sent: Monday, March 15, 2004 10:31 AM
> > To: Kyle Stone; cisco-voip at puck.nether.net
> > Subject: Re: [cisco-voip] Asterisk and a CCM...
> >
> > You should be able to see the H225 communication between the gateway
> and
> > CM
> > in the CallManager traces.  Make sure they are set to detailed.  If
> you
> > are
> > running an older version of CM (ie 3.1) you will also want to set
> > SdlTraceTypeFlag to 0x8000EB15.  This trace should also tell you the
> > disconnect cause for the call.
> >
> > What type of trunk do you have going to the Asterisk?  If it's a PRI
> > what
> > does a 'debug isdn q931' show?
> >
> > -Ryan
> > ----- Original Message ----- 
> > From: "Kyle Stone" <kstone at teledvance.com>
> > To: <cisco-voip at puck.nether.net>
> > Sent: Monday, March 15, 2004 10:19 AM
> > Subject: [cisco-voip] Asterisk and a CCM...
> >
> >
> > > I'm trying to bridge Asterisk PBX and CCM.  I setup a h323 gateway
> on
> > > CCM and pointed it to the Asterisk box.  I build chan_oh323 for
> > > asterisk.. installed it, and pointed it to route to the CCM.
> > > I call a CCM extension from Asterisk and the phone rings 1.5 times
> and
> > > CCM ends the call.  I can tell this from the Asterisk debug logs.
> > >
> > >
> > > Anyone have any suggestions as how to debug this on the CCM side?
> > >
> > >
> > >
> > > _______________________________________________
> > > cisco-voip mailing list
> > > cisco-voip at puck.nether.net
> > > https://puck.nether.net/mailman/listinfo/cisco-voip
> >
>