[cisco-voip] Caller ID

[Wes Sisk]

MessageMake sure your outbound route pattern has "use calling party's
external phone number mask" checked.

There are a few other params that will override this:
1. callerid service param of CCM
2. callerid config option on gateway/endpoint (sometimes there, not always)
3. translation pattern that is matched before route pattern that modifies
the calling party number.

/Wes
  -----Original Message-----
  From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net]On Behalf Of Ward Knutson
  Sent: Thursday, March 25, 2004 10:56 AM
  To: Cisco-Voip (E-mail)
  Subject: [cisco-voip] Caller ID


  I have Cisco Call Manager 3.3.  When we have recently added caller id.
The problem I have is my outgoing calls don't send the id info.  Incoming
call information is coming thru fine.  Is there a setting that I need  to
adjust on the CCM.  Our external phone number mask is set up 701*355*XXXX.
I tried changing that to the extension number without any luck.  I contacted
the local Telco who provides the service and they seem to think the problem
is on my end.



  Ward Knutson
  Network Coordinator
  Bismarck Public Schools
  Bismarck, ND 58501
  701-355-3037



-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20040325/2e2f26ff/attachment.html