[cisco-voip] debug isdn q931 --> FXO port

[Wes Sisk]

q931 is out-of-band signaling (over the d-ch on your PRI).
There is no parallel in the in-band signaling world.
The closest you get is 'debug vpm signal'
http://www.cisco.com/en/US/partner/tech/tk652/tk701/technologies_tech_note09
186a0080094045.shtml

/Wes

> -----Original Message-----
> From: cisco-voip-bounces at puck.nether.net
> [mailto:cisco-voip-bounces at puck.nether.net]On Behalf Of Voll, Scott
> Sent: Wednesday, May 05, 2004 9:19 AM
> To: cisco-voip at puck.nether.net
> Subject: [cisco-voip] debug isdn q931 --> FXO port
>
>
> What command on a FXO V-GW gives me basically the same info as Debug
> isdn Q931?  I just want to see the call coming into the GW's FXO.
>
> TIA
>
> Scott
>
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip