[cisco-voip] debug isdn q931 --> FXO port

[Wes Sisk]

debug vpm signal

look for the gw sending an MGCP observed offhook event "hd" back to CCM
something like:
O: hd

/Wes

> -----Original Message-----
> From: Voll, Scott [mailto:Scott.Voll at wesd.org]
> Sent: Wednesday, May 05, 2004 9:35 AM
> To: Wes Sisk
> Subject: RE: [cisco-voip] debug isdn q931 --> FXO port
> 
> 
> Wes-
> 
> I just want to see the call coming into the gatway.  What will give me
> that info. I'm running MGCP.  I normally deal with PRIs so I'm a little
> thrown off by the FXO.
> 
> Thanks
> 
> Scott
> 
> -----Original Message-----
> From: Wes Sisk [mailto:wsisk at cisco.com] 
> Sent: Wednesday, May 05, 2004 6:33 AM
> To: Voll, Scott; cisco-voip at puck.nether.net
> Subject: RE: [cisco-voip] debug isdn q931 --> FXO port
> 
> q931 is out-of-band signaling (over the d-ch on your PRI).
> There is no parallel in the in-band signaling world.
> The closest you get is 'debug vpm signal'
> http://www.cisco.com/en/US/partner/tech/tk652/tk701/technologies_tech_no
> te09
> 186a0080094045.shtml
> 
> /Wes
> 
> > -----Original Message-----
> > From: cisco-voip-bounces at puck.nether.net
> > [mailto:cisco-voip-bounces at puck.nether.net]On Behalf Of Voll, Scott
> > Sent: Wednesday, May 05, 2004 9:19 AM
> > To: cisco-voip at puck.nether.net
> > Subject: [cisco-voip] debug isdn q931 --> FXO port
> >
> >
> > What command on a FXO V-GW gives me basically the same info as Debug
> > isdn Q931?  I just want to see the call coming into the GW's FXO.
> >
> > TIA
> >
> > Scott
> >
> >
> >
> > _______________________________________________
> > cisco-voip mailing list
> > cisco-voip at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/cisco-voip
>