[cisco-voip] Multiple Span Ports

[Grabowski, David]

You can set up multiple SPAN sessions on a 6500.
 
set span <blah blah blah> create
 
See
http://www.cisco.com/en/US/customer/products/hw/switches/ps708/products_
configuration_guide_chapter09186a008007f323.html
 

SPAN/RSPAN Sessions 
Catalyst 5000 Family Switches
<http://www.cisco.com/en/US/customer/products/hw/switches/ps708/products
_configuration_guide_chapter09186a008007f323.html#1019923> 1
Catalyst 6000 Family Switches
<http://www.cisco.com/en/US/customer/products/hw/switches/ps708/products
_configuration_guide_chapter09186a008007f323.html#1019928> 2 	

rx or both SPAN sessions

1

2


tx SPAN sessions

4

4


tx, rx, or both RSPAN source sessions

-

1


RSPAN destinations

-

24


Total SPAN sessions

5
<http://www.cisco.com/en/US/customer/products/hw/switches/ps708/products
_configuration_guide_chapter09186a008007f323.html#1023296> 3

30
<http://www.cisco.com/en/US/customer/products/hw/switches/ps708/products
_configuration_guide_chapter09186a008007f323.html#1023322> 4

 

-----Original Message-----
From: Jesse A. Pine [mailto:jpine at fulfillmentplus.com]
Sent: Friday, April 30, 2004 11:09 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Multiple Span Ports



I am configuring mutliple IPCC Express servers for a testing
environment.  I am trying to configure the RASCAL monitoring service.
For those not familiar with it, it requires a secondary NIC setup on a
SPAN port so that it can monitor/sniff the voice packets.  Unfortunately
I've ran into a problem.  The switch already has SPAN setup for another
RASCAL configuration.  This is on a Catalyst 6509 running CatOS 6.4.  I
was wondering if it is possible to configure to different SPAN
configurations on the same switch?  If so, is there a version of CatOS I
should upgrade to that would support it, or do I need to go to IOS?
Thanks in advance!
 
Jesse


#####################################################################################
CONFIDENTIAL: This e-mail, including its contents and attachments, if any, are confidential. It is neither an offer to buy or sell, nor a solicitation of an offer to buy or sell, any securities or any related financial instruments mentioned in it. If you are not the named recipient please notify the sender and immediately delete it. You may not disseminate, distribute, or forward this e-mail message or disclose its contents to anybody else. Unless otherwise indicated, copyright and any other intellectual property rights in its contents are the sole property of Mizuho Securities USA Inc.
     E-mail transmission cannot be guaranteed to be secure or error-free. The sender therefore does not accept liability for any errors or omissions in the contents of this message which arise as a result of e-mail transmission.  If verification is required please request a hard-copy version.
     Although we routinely screen for viruses, addressees should check this e-mail and any attachments for viruses. We make no representation or warranty as to the absence of viruses in this e-mail or any attachments. Please note that to ensure regulatory compliance and for the protection of our customers and business, we may monitor and read e-mails sent to and from our server(s).
#####################################################################################
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20040510/97fe364f/attachment.html