[cisco-voip] T1 Caller ID

[Wes Sisk]

Hi Nick,

You have what we call a Feature Group D (fgd) trunk.  CM does not 
support fgd with MGCP, but you can take an IOS gateways, configure it as 
an h323 gateways, and have callerid working.

/Wes

Nick Marus wrote:

>Got a weird situation here...
>
>Removing an old system and replacing it with a call manager. The older
>system had a T1 for long distance, that they were getting caller ID on
>by having the following format of digits sent on incoming calls
>"*XXXXXXXXXX*1234", where the x's represent the caller id. No Problem
>routing the call in call manager, just have a translation pattern with
>*XXXXXXXXX*1234 pointing to internal extension 1000. Routes fine.
>
>What I need is to send the caller ID represented in the X's in the
>above string to the phone...
>
>Any ideas on how to do this? 
>
>I've played around with "Calling Party Transformations" in
>"Translation Patterns" a bit but cant seem to do it there.
>
>Nick
>_______________________________________________
>cisco-voip mailing list
>cisco-voip at puck.nether.net
>https://puck.nether.net/mailman/listinfo/cisco-voip
>  
>