[cisco-voip] MoH Multicast

[Voll, Scott]

For the record:

Reverse path was my problem.  I'm using static routes over two different
PVCs.  Once I put in the route, all was fixed.

-----Original Message-----

This is what my show ccm-manager music shows:

macgw#sh ccm mus
Current active multicast sessions : 1
 Multicast       RTP port   Packets       Call   Codec    Incoming
 Address         number     in/out        id              Interface
===================================================================
239.1.1.3         20000   0/0              58577   g729r8

As you can see, it knows the multicast address and port, but no packets
are flowing and it doesn't show a incoming interface.

Scott

-----Original Message-----

I have CM setup to use Multicast for MoH.  It works on the local LAN but
over my WAN all I get is silence.

When I do a Sh ccm music I see the the multicast address and RTP port.
I see the codec is G729 but I have no incoming interface and packets are
not going in or out.  Based on that, I think my configs are good.

IP Mutlicast routing

Ip pim sparse-dense-mode on each interface

ip pim rp-address x.x.x.x to the main router.

What else am I missing?  I'm not sure it's a codec / bandwidth issue on
CM.  Can someone direct me?

Thanks

Scott