[cisco-voip] Ports used by attendant console

[Ryan Ratliff]

For starters what is the error you are getting?

Are thee lines of the phone you are trying to control associated with 
the ac user?
If you are running CM 3.3(x) or earlier are any of those 6 lines shared 
lines?

By the way I'm pretty sure both of these questions were asked earlier 
with no answer given.

-Ryan
On Nov 11, 2004, at 12:28 PM, Anthony Kouloglou wrote:

> Hi all,
> i want to use attendant console in a PC that is in a different VLAN of 
> the iptelephony VLAN.
> Does anyone knows, which TCP and UDP ports shall i allow from one VLAN 
> to the other?
> Thanks.
> Of course i haven't yet be able to make the attendant console to work, 
> even though it is still in the same VLAN of the callmanager (the voice 
> VLAN).
> The directory entries are shown correclty, with the correct line 
> status but the lines of the Attendant console (6 lines) do not appear 
> and i get an error!
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip