[cisco-voip] Constant Transient Connection from ATA

[Carter, Bill]

This was the issue.  I disabled to 2nd analog port and Transient
Connections stopped.

Thanks

-----Original Message-----
From: Tim Medley [mailto:medley at mac.com] 
Sent: Saturday, November 20, 2004 10:15 AM
To: Carter, Bill; cisco-voip at puck.nether.net
Subject: RE: [cisco-voip] Constant Transient Connection from ATA


Do you have some ATA's where only the first port is being used? If so,
then the port two's are what is trying to register with CallManager and
causing the transient connection attempts. You can either turn off the
second port on the ATA or register it in CCM and just not use it.

Tm

-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Carter, Bill
Sent: Friday, November 19, 2004 9:02 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Constant Transient Connection from ATA

In Call Manager Event Viewer I am getting Transient Connection Attempted
from an ATA.  It is happening every few minutes.  I have the latest
skinny image.  Call Manager is now 4.1(2), but I had the same issue with
4.0(X).

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip