[cisco-voip] 7960 firmware load P00306000400

[Mike Armstrong]

I had a similar problem, which turned out that I had updated phone firmware 
loads in the CM Publisher OK, but neglected to update the Subscriber. 
However, the phones were registered to the Subscriber, so when they reset, 
they got the loads that were in the Subscriber.  I do remember looking in 
the Subscriber System->Device Defaults and seeing the new loads listed, and 
thinking that somehow the Subscriber had automagically updated itself. 
Needless to say....

Mike Armstrong
UF/IFAS CREC

> Date: Tue, 23 Nov 2004 15:43:59 -0500
> From: Candace Holman <Candace_Holman at harvard.edu>
> Subject: [cisco-voip] 7960 firmware load P00306000400
> To: cisco-voip at puck.nether.net
> Message-ID: <5.2.1.1.2.20041123153736.02a34720 at camail.harvard.edu>
> Content-Type: text/plain; charset="us-ascii"; format=flowed
>
> I have a phone stuck with firmware load P00306000400 (6.0-3).  I set the
> device record in CM (3.3.3) to force it to use P00305000400 (5.0-4) and it
> will not pick up the older load on a reset.  There are no errors in the
> status messages on the phone, and no tftp errors on the server.  Does
> anyone know a workaround?
>
> Thanks,
>
> =====================================================================
> Candace Holman