[cisco-voip] AS5200 for PRI and VoIP

[Josh Duffek]

Only two T1s:
http://www.cisco.com/cgi-bin/Support/browse/psp_view.pl?p=Hardware:AS520
0&s=Hardware_Info#Modules

The feature navigator(cisco.com/go/fn) doesn't show the 5200 as an
option when I select H.323.  You might be able to get it to do network
side PRI but that's about it...its been awhile so I'm not sure.

josh

> -----Original Message-----
> From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-
> bounces at puck.nether.net] On Behalf Of Tim Medley
> Sent: Friday, October 08, 2004 10:41 AM
> To: cisco-voip at puck.nether.net
> Subject: [cisco-voip] AS5200 for PRI and VoIP
> 
> I have a couple of AS5200's sittings in a closet collecting dust and I
am
> wondering if I can utilize these in a lab environment to simulate some
> PRI's.
> 
> Are the AS5200's capable of running h323? Can I terminate more than 2
> PRi's
> in an AS5200?
> 
> Anyone have any thoughts or comments?
> 
> Tm
> 
> Tim Medley
> 
> 
> 
> 
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip