[cisco-voip] Adding Dial Peer

[Tim Medley]

Scott,

I have run into this before, a reboot of the router should clear this up.
Typically this happens when the router runs out of config memory.

That is not very many dial peer's, I have seen configurations with many more
than 100.

Tim

-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Voll, Scott
Sent: Friday, October 15, 2004 10:05 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Adding Dial Peer

Has anyone else seen this problem?

PBX-VoIP(config)#dial-peer voice 10 pots
ERROR: could not add peer

When I try to add a dail peer I get error above.  I currently am using a
2621 running Ver. 12.3(10).

Is there a max dial peer?  I currently only have 103 dial peers.

Any ideas?

Scott 


_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip