[cisco-voip] 7920 and CM 3.1.x

[Lelio Fulgenzi]

>From http://www.cisco.com/en/US/products/hw/phones/ps379/products_data_sheet09186a00801739bb.html
Protocols Supported
  a.. Compatible with Cisco CallManager Version 3.2 and later, using the Skinny Client Control Protocol 
  b.. Compatible with Cisco Survivable Remote Site Telephony (SRST) Version 2.0 and later. 
-----                                                                -----
Lelio Fulgenzi, B.A.                                  lelio at uoguelph.ca.eh
Network Analyst (CCS)
University of Guelph                             FAX:(519) 767-1060 JNHN
Guelph, Ontario N1G 2W1                          TEL:(519) 824-4120 x56354
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
     remove the 1st letter of the canadian alphabet from my email, eh!
  ----- Original Message ----- 
  From: andrea 
  To: cisco-voip at puck.nether.net 
  Sent: Friday, October 22, 2004 1:07 PM
  Subject: [cisco-voip] 7920 and CM 3.1.x


  Hi all,

  I've a question on wireless IP Phone 7920: is it possible to use it with 
  a CM 3.1.x?
  thanks

  andrea


  _______________________________________________
  cisco-voip mailing list
  cisco-voip at puck.nether.net
  https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20041022/a8d37a28/attachment.html