[cisco-voip] Recover old settings of CRA engine from the Regedittool

[George Dormishev]

This is because you have entered a wrong ip address of the call manager see if it’s correct and you have a ping to it !!!!!

 

  _____  

From: Anthony Kouloglou [mailto:akoul at dataways.gr] 
Sent: 22 Октомври 2004 г. 16:48
To: George Dormishev
Subject: Re: [cisco-voip] Recover old settings of CRA engine from the Regedittool

 

I did it and it did come up! But in the third step i got a LDAP configuration error. There has been some failure...

----- Original Message ----- 

From: George Dormishev <mailto:gdorm at is-bg.net>  

To: 'Anthony Kouloglou' <mailto:akoul at dataways.gr>  

Cc: cisco-voip at puck.nether.net 

Sent: Παρασκευή, 22 Οκτωβρίου 2004 15:02

Subject: RE: [cisco-voip] Recover old settings of CRA engine from the Regedittool

 

You don’t need the engine to be started you just have to start the IIS service and try to access it!!!!! IT should work!!

 


  _____  


From: Anthony Kouloglou [mailto:akoul at dataways.gr] 
Sent: 22 Октомври 2004 г. 11:21
To: George Dormishev
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] Recover old settings of CRA engine from the Regedittool

 

George,

when i look in the services, the CRA engine has not started because it has wrong settings. Since, it has not started, i dont't know how i can access the web interface.

----- Original Message ----- 

From: George Dormishev <mailto:gdorm at is-bg.net>  

To: 'Anthony Kouloglou' <mailto:akoul at dataways.gr>  

Cc: cisco-voip at puck.nether.net 

Sent: Παρασκευή, 22 Οκτωβρίου 2004 12:44

Subject: RE: [cisco-voip] Recover old settings of CRA engine from the Regedittool

 

 

You should be able to run the CRA from the Admin page with the default pass and user Administrator and ciscocisco they are case sensitive !  If you can do that then the job is half-past done go to Configuration and Repository and change the ccm ip address!!! Restart the Engine and all should work fine.Mine one did!!! 


  _____  


From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Anthony Kouloglou
Sent: 22 Октомври 2004 г. 10:36
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Recover old settings of CRA engine from the Regedittool

 

Hi all,

could someone please help me with this one.

 I have a ccm 3.3(3) sr3 with a  CRA engine running on it (with no problems at the first time).

I changed the ip of the CCM and after several months i needed to run the CRA again. But it didnot run since it had the old settings!

How can i retrieve the old IP address that was configured on the CRA?

Via the regedit tool? And where is it located?

Thanks.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20041025/9b9a2c69/attachment-0001.html