[cisco-voip] AS5300 Translate rule

[Jabriel Tezser]

Hi all,
I have a problem in translating rule in AS5300,
I want to translate any outgoing call as national format
But in our telco is always recorded as international format
Below this is my configuration:
! Configuration of the ISDN interface 
interface Serial3:15 
 no ip address 
 ip mroute-cache 
 no logging event link-status 
 no snmp trap link-status 
 isdn switch-type primary-ni 
 isdn incoming-voice modem 
 isdn rlm-group 2 
 isdn T310 200000 
 isdn T307 30000 
 no isdn send-status-enquiry 
 isdn negotiate-bchan 
 no cdp enable 
! 
! 
translation-rule 21861 // 
 Rule 0 any 817554441 ANY national !!! All the other translations  for
the other dummy numbers follow the same pattern 
! 
translation-rule 8 
 Rule 0 ^0 0 ANY international 
 Rule 1 ^1 1 ANY international 
 Rule 2 ^2 2 ANY international 
 Rule 3 ^3 3 ANY international 
 Rule 4 ^4 4 ANY international 
 Rule 5 ^5 5 ANY international 
 Rule 6 ^6 6 ANY international 
 Rule 7 ^7 7 ANY international 
 Rule 8 ^8 8 ANY international 
 Rule 9 ^9 9 ANY international 
! 
 dial-peer voice 2186311 pots 
 huntstop 
 destination-pattern 2186#62361 
 progress_ind setup enable 3 
 progress_ind alert enable 8 
 progress_ind progress enable 8 
 translate-outgoing calling 21861 
 translate-outgoing called 8 
 port 3:D 
 prefix 62361 
thanks for advice
Regards,
Jabriel
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20041027/f9026837/attachment-0001.html